Change history for BulkFileChanger


2021-01-06 22:33:20
Updated by billon

  • Version: v1.712
  • Size (in bytes): 138727093
  • Release date: 20201-041-056
  • What's new: [list][*]FixAdded 'Photo - Date Taken' option to set the date/time when the photo was taken. This feature is similar to the 'EXIF - Generated Time' option, but it uses the Property System of Windows, which may work better in some situg:ations. For Texample: the 'Photo - Date extension column displTayked incorrecn' option will set the photo vdalue whte/time even if the ore was iginal [i].jpg[/i] foile doer with '[i].[/i]sn't characonter and failename w EXIF ithnfout exrmatension.[/list]


2020-04-05 19:29:47
Updated by billon

  • Version: v1.701
  • Size (in bytes): 136572470
  • Release date: 201920-04-10-225
  • What's new: [list][*]Added support for document fFilxesd bug: (Word,The Eexcel) date/time values - 'Content Created Time' and 'Last Saved Time'.[list][*]This feature works on Windows 7 atend later.[*]If you have 64-bit system, this feation colure may workmn dimprosperly with the 32-bit version of BulkFileChanger, so you shouled use the 64-bit version cofrrect BulkFileChvalue whenge there was a folder with '[i].[/i]' character and filename wist]hout extension.[/list]


2019-10-22 19:41:21
Updated by billon

  • What's new: [list][*]Added support for document files (Word, Excel) date/time values - 'Content Created Time' and 'Last Saved Time'.[list][*]This feature works on Windows 7 and later.[*]If you have 64-bit system, this feature may work improperly with the 32-bit version of BulkFileChanger, so you should use the 64-bit version of BulkFileChanger.[/list][/list]


2019-10-22 19:40:23
Updated by billon

  • Version: v1.6570
  • Size (in bytes): 13652114
  • Release date: 2019-107-22
  • What's new: [list][*]BulkFileChanger now allowAdded s you to change and copy the date/time valuesport stfor documed inside mediat files ([i].mp4[/i], [i].mov[/i]).[list][*]You can change/copy 3 date/time values: Item Date, Date Word, Encoded, Date Acquired.[*]This feature works on Windows 7 and xcelater.[*]Be aware that the effect of changing these dat) date/timtime values might be different- 'Content diffeCrenat ed Time' and 'Last Saversed Time'.[list][*]This feature works on Windonws of Wi7 andow later.[*]f you have 64-bit system, this ofeature may work improperatily with the 32-bit version of BulkFileChang ser, so you should use the 64-bit version of BulkFileChangemr.[/list][/list]


2019-07-22 20:53:43
Updated by billon

  • Version: v1.615
  • Size (in bytes): 14362011
  • Release date: 2019-057-0622
  • What's new: [list][*]ABulkFileChanger now allows you to change and copy the date/time values stored inside media files ([i].mp4[/i], [i].mov[/i]).[list][*]You can change/copy 3 date/time values: Item Date, Date Encoded, Date Acquired.[*]This feature works on Windows 7 and later.[*]Be aware that the effect of changing these date/time values might be different on different ved [rsions ofo Wint=monodows opace]/ChangeTimeAttrSingle[/font] command-line opttion to change the date/tisysteme.[/attributes of a single file/folder.st][/list]


2019-05-07 11:34:07
Updated by billon

  • Version: v1.601
  • Size (in bytes): 114739201
  • Keywords: bulk%20file%20changer nirsoft
  • Release date: 2019-025-1406
  • What's new: [list][*]BulkFileChanger now allows you to change the date/time values stored inside EXIF data of [i].jpg[/i] files.[*]You can change 3 EXIF date/time values: Generated Time, Stored Time and Modified Time.[*]The most useful field to change is the 'Generated Time' (also known as 'Date Taken'), because this field is displayed under the 'Date' column of Windows Explorer and also many applications use this value as official dAdded [font=monospate/time of the picture.[*]This feature works only when t/Che datnge/tTime values aleAttready exist iSinside thgle [i].jpg[/ifont] files (BulkFileChanger commannot add new fie-lds ine optoion to change the EXIFe data)e/time/attributes of a single file/folder.[/list]


2019-02-14 19:29:42
Updated by billon

  • Version: v1.5260
  • Size (in bytes): 112845739
  • Release date: 20189-1102-124
  • What's new: [list][*]Added 'BulkFileChanger now allows you to change the date/time values stored inside EXIF data of [i].jpg[/i] files.[*]You can change 3 EXIF date/time values: Generated Time, Stored Time and Modified Time.[*]The most useful field to change is the 'Generated Time' (also known as 'Date Taken'), because this field is displl Cayed urrender the 'Date' Tcolumn of Windows Explorer and also many applications use this value as official date/time of the pimcture.[*]This feature works only when the date' but/time values already existo in, wside thich fe [i].jpg[/i] files (BulkFills all daeChanger cannote/time fi add new fields in the 'Change file time / attributes' windtow with the current EXIF date/timea).[/list]


2018-11-12 17:59:34
Updated by billon

  • Version: v1.512
  • Size (in bytes): 11268405
  • Release date: 20178-0911-212
  • What's new: [list][*]Added 'Fill DaCurrente/ Time From File' button to the 'Change file time / attributes' window. When you clickime' button, it, you can choose a file and then the current date/time of twhis file will be copied to the date/time fiells all date/time fields ofin the 'Change file time e / attributes' window with the current date/time.[/list]


2017-09-22 14:50:40
Updated by billon

  • Version: v1.501
  • Size (in bytes): 112273640
  • Keywords: bulk%20file%20changer
  • Release date: 2017-089-21
  • What's new: [list][*]Added:[list][*][font=monospace]/ChangeTimeAttr[/font] command-line option which automatically scans the specified folder and its subfolders and modifies the date/time/attributes according to the [i].cfg[/i] file, without displaying any user interface;[*][font=monospace]/LogFile[/font] and /[font=monospace]Log'FileAppend[/font] command-line options which write alill date/time changes and errors into Da lte/Time Frog file (form using wFithle' [fonbutton to the 'Change file time / at=monospace]/ChangeTimeAttr[/font]);[*][font=monospace]/cfg[/font] command-line option for loading another configuration file instead of the defabultes' window. Whene.[/list] [*]Updated you click it, you can choose a file and then the current 'Atdate/tributmes' column to df thisplay thefile folwilowing Attributes: 'I' for 'Not Content Indexed', 'E' forl be encryopied ted file, 'X' for 'No Scrub Filthe', an date/time fields 'V' forf the 'IChantgegrity A file time / attriibutes' window.[/list]


2017-08-21 12:54:46
Updated by billon

  • Website URL: https://www.nirsoft.net/utils/bulk_file_changer.html
  • Version: v1.450
  • Synopsis: BulkFileChanger allows you to gather a list of files via drag-and-drop, explorer, or wild card searches. Users can then execute a command, change properties (time/date/hidden/read-only, etc.), export file list, or copy/move files to another location.
  • Size (in bytes): 1070152273
  • Download URL: https://www.nirsoft.net/utils/bulkfilechanger.zip
  • Release date: 20167-068-241
  • What's new: [list][*]'Change Time / Attributddes' window:[list][*]T[font=monospace]/Change datTimeAttr[/font] command-line option which automatically scans the specified folder and its subfolders and modifies the date/time/attributes according to the [i].cfg[/i] file, without displaying any user interface;[*][font=monospace]/LogFile[/font] and /[font=monospace]LogFileAppend[/font] command-line options which write all date/time changes and errors into a log file (for using with [font=monospace]/ChangeTimeAttr[/font]);[*][font=monospace]/cfg[/fonti] commeand-line option for loading another configuration file instead of the vdefalues are nlt ow stored in the .cfg fi[/le.ist] [*]AUpdateded 'Save Settings the ' buAttton, for saving buthes' colurrmn to display the following Attributent s: 'I' for 'Not Contenttings wiIndexed', 'E' for encrypthed file, 'X' for 'No Scrutb changing any fFile.[/list] [*]You can now drage', a file from Windows Expl'V' forer i'Into the 'Change Time / Attrrity Attributes' window and the created/modified/accessed times of this file will be copied to the appropriate date/time settings'.[/list]


2016-06-24 15:02:26
Updated by billon

  • Icon: Updated


2016-06-24 14:58:04
Updated by billon

  • Version: v1.3540
  • Size (in bytes): 10701615
  • Release date: 20156-1106-214
  • What's new: [list][*]'Change Time / Attributes' window:[list][*]The date/times values are now stored in the .cfg file.[*]Addedd 'Save Settings' button, for saving the current settings without changing any file.[/list] [*]You can now drag a file from Windows Explorer into the 'RuChange Time / As Administratottributes' op window and the created/modified/accessed times on (Cf trhis fil+F11),e which allows you to easily run BulkF be copileCed to thanger as administrppropriator one Windows Visata/7/8e/2008. [*]BulkFileChanger now can rtime sead the EXIF data of CR2 raw ftilengs.[/list]


2015-11-21 22:56:04
Updated by Checker

  • Screenshot: Updated


2015-11-21 22:54:49
Updated by Checker

  • Version: v1.335
  • System Requirement:
  • Size (in bytes): 99827100161
  • Release date: 2000015-11-00-0021
  • What's new: [list][*]Fixed bug fAdded 'Run As Administrator' option (Ctrl+F11), which allows you to easily run BulkFileChanger as administrator on Windomws v1.3Vista/7/8/2:008. [*]BulkFileFileChanhangeer now can read the sEXIF data oppedf CR2 workingaw on Wfindowles 2000.[/list]


2014-03-21 16:22:58
Updated by Checker

  • Forum topic ID: 05746


2014-03-12 17:11:07
Updated by Checker

  • Version: v1.323
  • Size (in bytes): 9982701
  • What's new: [list][*]Fixed bug from v1.32: BulkFileileChanger to display and handle daylight saving er stime oproperly, liked Explworerking on Windows 72000.[/list]


2013-12-17 18:16:48
Updated by Checker

  • Version: v1.312
  • Size (in bytes): 99525701
  • What's new: [list][*]BulkFileChanger now displays file Fixedates prior to 01/01/1980. In previous versions, BulkFileileChanger didn't er to display these d and hates in order to ble compdatylibleght saving wtithme properly, Wlindowske Explorer on Windows 7.[/list]


2013-11-18 18:17:04
Updated by Checker

  • Version: v1.301
  • Size (in bytes): 989525
  • What's new: [list][*]BulkFileChanger now displays an error message if it fails file dates prior to cha 01/01/1980. Inge the datpre/time/attributes of one or more files. [*]Added 'Modifvious versions, BulkFiled-Crehatenger d Time Differednce' column, which displays the time difference (in hours:minutes:seconds.milliseconds format) between the created time and the modified time of the file. This time difference might be interesting in some circumstances. For example: If you download a new file from the Internet, the file is created at the moment you start to download it, and its modified time is set to the time that the last byte was written to the file. This means that the created/modified time t difference respresentslay these duration ofes in order to be downlcompadtible with Wingdows Exprlocressr.[/list]


2013-10-20 13:34:20
Updated by Checker

  • Version: v1.2530
  • Size (in bytes): 971118952
  • What's new: [list][*]You can now specify environment variBulkFileChanger now displays an error message if it fails to change the date/time/attributes of one or more files. [*]Added 'Modified-Created Time Difference' column, which displeays the time difference (For ein hours:minutes:seconds.milliseconds format) between the created time and the modified time of the file. This time difference might be interesting in some circumstances. For example:ple: If you download a new file from the Internet, the file is created at the moment you start to download it, and its modified time is set to the time that the last byte was written to the file. This means that the created/modified time difference %aprepdata%) iresen ts the folder path to sce durantion of ('Add By Wiownldcoard'ing optiron)cess.[/list]


2013-06-13 15:33:48
Updated by Checker

  • Version: v1.245
  • Size (in bytes): 969027111
  • What's new: [list][*]Fixed bug: IfYou can now specify yenvirou added filnmes, and then remot ved them farom thiables list, Bulk(FileChangeror example: %appdata%) in the faioled to adder pathem to scagn ('Add By Wildcard' option).[/list]


2013-03-27 21:50:41
Updated by Checker

  • Version: v1.234
  • Size (in bytes): 9679025
  • What's new: [list][*]Fixed issuebug: BulkFileChanger failed to copy EXIF properties from .jpg image to the created/mo If you adified/accessed time of the files, On Windows 7 and Windows 8. The problem is actually in t and the GDI+ library of Windows which fremom unknown reason fails to read these EXIF properties. So BulkFileChanger now reads the EXIF data directly instvead of using them from the GDI+ librst, BulkFileChangery offailed to add them Wagaindows.[/list]


2013-03-10 12:16:46
Updated by Checker

  • Synopsis: BulkFileChanger is a small utility that allows you to gather a list of files via drag-and-drop, explorer, or wild card searches. Users can then execute a command, change properties (time/date/hidden/read-only, etc), export file list, or copy/move files to another location.


2013-03-10 12:15:32
Updated by Checker

  • Version: v1.223
  • System Requirement:
  • Size (in bytes): 96725153
  • What's new: [list][*]Fixed issue: The properties dialog-box and other windows opened in the wrong monitor, on mBulti-lkFileChanger failed to copy EXIF properties from .jpg image to the created/modified/accessed time of the file, On Windows 7 and Winitdorws syste8. The problem is actually in the GDI+ library of Windows which from. [*]Added 'Autounknown reason fails to read these EXIF properties. Sizo BulkFileChanger Cnow reads the EXIF data directlumy ins+Hteader of us' option,g the GDI+ which allowsibrary you tof automatically resWize the columns according to the rdow values and column headers. [*]Added 64-bit build.[/list]


2013-01-08 18:13:44
Updated by Checker

  • Version: v1.212
  • System Requirement:
  • How to extract: Download the ZIP package and extract to a folder of your choice. Launch [i]BullkFileeChanger.eexe[/i].
  • Size (in bytes): 884395153
  • What's new: Fixed bug: Bu[lkist][*]Filixed issue: The propertieChanger fs dialog-box and other windows opened iln thed towrong monitor, on multi-monitors system. [*]Added 'Auto Size Columns+Headisers' oplation, which allows you to automatheically siresize the columns according to the row values and date/timend inforcolumation for a filenheameders. [*]Added 64-bithat beguild.[/lins with dot character.]


2012-02-06 16:42:10
Updated by Checker

  • Version: Vv1.201
  • Size (in bytes): 88217435
  • What's new: Added 3 new options into 'Copy Time From': EXIF - Generated Time, EXIF - Stored Time, and EXIF - Modified Time. You can use these options to copy the date/time stored insFixede EXIF data of di bugita: BulkFil camera picture iChanto theger crfailead ted/mo difiedsplay the size and date/time information f the or a filename that begins with dot character.


2011-10-28 12:44:33
Updated by Checker

  • Version: V1.1520
  • Size (in bytes): 87829617
  • What's new: Added 'Date/time sequence mode'3 new option. Whentions int's turnedo 'Con,py BulkFTilmeChanger will set a different date/time value for every file, and the 'Add' field will be used to add additional time interval for every file. For example, if you set the modified date/time to '07/07/2011 10:12:15' and the add value is set to 1 second, the modified time of the first file will be set the '07/07/2011 10:12:15', the seco': EXIF - Gend file will be set to '07/07/2011 10:12:16', the third fileated wTill be smet to '07/07/2011, 10:12:17', and so on... The order of the files is determined according toEXIF - Sthe column you click. So, if for exampleed Time, you click the filename column and then use the 'D ate/time sequenced EXIF m- Modified Time. You can use', these date/optime valuesons to copy the wdate/till bme set according to the d inside EXIF data of digilental came alera phabeicture into the creal orted/modified time of the filer.


2011-08-30 20:17:35
Updated by Checker

  • Version: V1.105
  • Size (in bytes): 8617296
  • What's new: Added the option to copy from one date/time value to'Date/time sequence mode' option. When it's turned on, BulkFileChanger will set a different date/time value for every file, and the 'Add' field will be used to add additional time interval for every file. For example, if you set the modified date/time to '07/07/2011 10:12:15' and the add value is set to 1 second, the modified time of the first file will be set the '07/07/2011 10:12:15', the second file will be set to '07/07/2011 10:12:16', the third file will be set to '07/07/2011 10:12:17', and so on... The order of the files is determined anccording to ther column you click. (FSo, if for example, ample, you can copy thclick the filename column and then use the 'Date/time sequence mode', the date/time values will be set modifieaccord ing to the filename into talphe created tbetime or the created time into the ml ordified time and accessed time)r.


2011-05-31 06:07:51
Updated by Checker

  • Version: V1.105
  • Size (in bytes): 853826179
  • What's new: BulkFileChanger now also allows you to change the date/time of a folder. You can add a folder by dragging it from Explorer or by adding it with 'Add By Wildcard' feature and 'Add Folders' option turned on. Added 'File Ex thens option'n to column. Adpy from one date/timed 'Mvark Odd/Even Rows' option, under the View menu. When it's tlurned to an, othe odd er. (For example, you candn even rcowspy arthe modisplayed in different color, to ied timake into the created t easier tme or the creaated time into the modified atime and accessingleed ltinme.)


2011-05-19 06:22:39
Updated by webfork

  • Version: V1.025
  • Size (in bytes): 84159382
  • What's new: AdBulkFileChanger now also allows you to change the date/time of a folder. You can add a folder by dragging it from Explorer or by adding it with 'Add By Wildcard' feature and 'Add Folders' option turned on. Addeed sup'File Extension' column. Added 'Mark Odd/Even Rows' option, under the View menu. When it's turned on, the odd and even rortws are displayed in diffoerent color , teo mpake it easier to read ary fil single attrlibutne.


2010-09-14 15:08:15
Added by guinness