SeaMonkey Portable

Submit portable freeware that you find here. It helps if you include information like description, extraction instruction, Unicode support, whether it writes to the registry, and so on.
Message
Author
User avatar
webfork
Posts: 7791
Joined: Wed Apr 11, 2007 8:06 pm
Location: US, Texas
Contact:

Re: SeaMonkey Portable

#31 Post by webfork » Sat Jul 01, 2017 10:02 pm

That's very odd. I've contacted Andrew to see if something went wrong.

Good eye.
Supporting Net Neutrality - BattleForTheNet | Why this matters | More from EFF.org

TP109
Posts: 483
Joined: Sat Apr 08, 2006 7:12 pm
Location: Illinois/Indiana

Re: SeaMonkey Portable

#32 Post by TP109 » Sun Jul 02, 2017 11:03 am

Midas wrote:I noticed the comment made by user robertcollier4 that I referenced in my customization post (http://www.portablefreeware.com/forums/ ... 837#p79837) is no longer available, so here's the transcript from the Internet Archive:
Thanks. Even if it ends up being a temporary error, duplicating information as a precautionary measure isn't wasted effort. I must have overlooked the original post, so I'm actually noticing this information for the first time.

User avatar
Midas
Posts: 4259
Joined: Mon Dec 07, 2009 7:09 am
Location: Sol3

Re: SeaMonkey Portable

#33 Post by Midas » Wed Jan 10, 2018 10:04 am

Here we go again... it seems the update check in SeaMonkey Portable doesn't work, the following official release info from the SeaMonkey project page notwithstanding.
author of https://www.seamonkey-project.org/releases/seamonkey2.49.1/ wrote:
SeaMonkey 2.49.1
Automatic upgrades from previous versions are, for most configurations, disabled for this release. Please download the full installer from the downloads section and install SeaMonkey 2.49.1 manually over the previous version.

As I'm used to casually check for FF updates via the corresponding menu option, I was kinda stuck with v2.46 for a very long time. On the brighter side, most customizations I made to my previous version are still working in the latest one, with the following caveat applicable to 'Classic Firefox Theme for SeaMonkey':

Although the developer did updated it, the official addon page at https://addons.mozilla.org/en-US/seamon ... -for-seam/ isn't reflecting it.


You have to look at his answer to reviews to notice this and the alternate URL for the download (should you wish to do so)...

author of https://addons.mozilla.org/en-US/seamonkey/addon/classic-firefox-theme-for-seam/reviews/#review-1024222 wrote:
I have updated the new version 0.0.22 a month ago but it isn't listed in the versions list and the reupload attempt ends with 'version 0.0.22 already exists' error !? Have no idea, what's wrong. Will send the feed to the AMO people.

Until solved, please find the temporary download of the SM 2.49.1 compatible version here (tested only on W8.1 and WXP, linux should work too):
http://pakokopa.szm.com/downloads/class ... .22-sm.xpi

User avatar
webfork
Posts: 7791
Joined: Wed Apr 11, 2007 8:06 pm
Location: US, Texas
Contact:

Re: SeaMonkey Portable

#34 Post by webfork » Thu Jan 11, 2018 4:43 pm

During the whole Meltdown craziness, this is the wrong time for an update functionality to break.
Supporting Net Neutrality - BattleForTheNet | Why this matters | More from EFF.org

User avatar
Midas
Posts: 4259
Joined: Mon Dec 07, 2009 7:09 am
Location: Sol3

Re: SeaMonkey Portable

#35 Post by Midas » Thu Jan 18, 2018 9:01 am

Anyone can tell me what's the name of (or how to to disable) those toggle strips so characteristic of SeaMonkey? I have been trying to recall that for days to no avail...

Image


At one time I had those disabled -- as you can see by the screenshot last posted -- but now I can't seem to do it or find the recipe I followed previously and the OCD is killing me... :roll:

Image


Midas wrote:
Thu Mar 17, 2016 11:56 am
An even simpler (albeit completely counter-intuitive) route is available. If while going to be "Mozilla Add-ons" webpage you get a message like the one displayed below, you can still go ahead and click the "Download Anyway" link and follow suit to install it -- the worst that can happen is you will get a non-working extension, which you can easily remove via Seamonkey's 'Add-ons Manager' interface.
And apparently, this isn't true anymore -- I don't see any such option when I visit https://addons.mozilla.org/, only the ugly green button below...

Image


You can solve that with a hack by the author of the online addon conversion utility -- http://addonconverter.fotokraina.com/. Install this SeaMonkey specific addon: https://addons.mozilla.org/en-US/seamon ... seamonkey/...
Last edited by Midas on Sun May 06, 2018 2:08 am, edited 2 times in total.

User avatar
SYSTEM
Posts: 1772
Joined: Sat Jul 31, 2010 1:19 am
Location: Helsinki, Finland

Re: SeaMonkey Portable

#36 Post by SYSTEM » Thu Jan 18, 2018 10:08 am

Midas wrote:
Thu Jan 18, 2018 9:01 am
Anyone can tell me what's the name of (or how to to disable) those toggle strips so characteristic of SeaMonkey? I have been trying to recall that for days to no avail...
They're called grippies.

Here's an old tip about how to disable them. I don't know if it still works.

http://seamonkey.ilias.ca/generalfaq/nogrippies
My YouTube channel | Release date of my 11th playlist: January 26, 2018

User avatar
Midas
Posts: 4259
Joined: Mon Dec 07, 2009 7:09 am
Location: Sol3

Re: SeaMonkey Portable

#37 Post by Midas » Thu Jan 18, 2018 10:29 am

Works! Thanks mate, you're a lifesaver. 8)

User avatar
Midas
Posts: 4259
Joined: Mon Dec 07, 2009 7:09 am
Location: Sol3

Re: SeaMonkey Portable

#38 Post by Midas » Sun May 06, 2018 2:10 am

SeaMonkey 2.49.3 released (release notes at https://www.seamonkey-project.org/relea ... key2.49.3/).

Post Reply