It is currently Tue Nov 21, 2017 9:23 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: ImageUSB
PostPosted: Thu Nov 29, 2012 2:50 am 
Offline
User avatar

Joined: Tue Nov 27, 2012 11:41 pm
Posts: 384
Quote:
ImageUSB is a free utility which lets you write an image concurrently to multiple USB Flash Drives. Capable of creating exact bit-level copies of USB Flash Drive (UFDs), ImageUSB is an extremely effective tool for the mass duplication of UFDs. ImageUSB also supports writing of an ISO file byte by byte directly to an USB drive (*). ImageUSB can also be used to install OSFClone to a USB Drive for use with PassMark OSForensics™.

Unlike other USB duplication tools, ImageUSB can preserve all unused and slack space during the cloning process, including the Master Boot Record (MBR). ImageUSB can perform flawless mass duplications of all UFD images, including bootable UFDs.

Homepage: http://www.osforensics.com/tools/write-usb-images.html
Download: http://www.osforensics.com/downloads/imageusb.zip

Image

Download and extract archive. Stealth.


Top
 Profile  
 
 Post subject: Re: ImageUSB
PostPosted: Fri Dec 07, 2012 6:19 pm 
Offline
User avatar

Joined: Wed Apr 11, 2007 8:06 pm
Posts: 7373
Location: US, Texas
Userfriendly wrote:
Quote:
ImageUSB is a free utility which lets you write an image concurrently to multiple USB Flash Drives.
Download and extract archive. Stealth.


I could have really used this back in the day. Can it copy from one drive to another? Tho I guess USB Image Tool post your viewtopic.php?f=4&t=20173 addresses that.

_________________
Supporting Net Neutrality - BattleForTheNet | Why this matters | More from EFF.org


Top
 Profile  
 
 Post subject: Re: ImageUSB
PostPosted: Tue Apr 19, 2016 11:39 pm 
Offline

Joined: Sat Jun 23, 2012 4:28 pm
Posts: 449
Latest version 1.3.1000


Top
 Profile  
 
 Post subject: Re: ImageUSB
PostPosted: Fri Apr 29, 2016 6:20 am 
Offline
User avatar

Joined: Mon Dec 07, 2009 7:09 am
Posts: 3865
Location: Sol3
FTR, full changelog is included in 'ReadMe.txt' inside download ZIP.

    'ReadMe.txt' author wrote:
    Release 1.3.1001
    WIN32 release 26 Apr 2016
    -Fixed a bug causing imageUSB to incorrectly write the header block back to the disk when image is not of even 1 MB chunks.

    Release 1.3.1000
    WIN32 release 19 Apr 2016
    - ImageUSB now supports Physical Disks instead of only volumes assigned drive letters by Windows.
      This should allow disks previous not selectable to be imagable. (unformatted drives, Linux drives, etc..)
    - Various GUI changes:
      ListView changed to TreeView control. This changed is to allow showing of partition information for each drive.
      New flashing complete dialog to indicate imaging completion and success or failure.
      Running count of number of drives selected for imaging is now displayed.

    Release 1.2.1006
    WIN32 release 7 Oct 2015
    - Addressed issue where extending partition on some NTFS drive would fail if the USB drive (preimaged) was already partitioned as max sized.

    Release 1.2.1005
    WIN32 release 9 Sep 2015
    - Addressed issue where some drives have the same volume GUID and would cause imageUSB unable to determine disk number for the UFD.

    Release 1.2.1004
    WIN32 release 29 Jul 2015
    - Addressed issue during image creation where imageUSB will error out before finishing the image for certain drive.

    Release 1.2.1003
    WIN32 release 30 Mar 2015
    - Format will add an MBR at sector 0 and partition entry table will point to the partition that was formatted.
    - Updated Format progress bar to stop and reset when completed.

    Release 1.2.1002
    WIN32 release 24 Mar 2015
    - Updated and added various Text/Strings to be more relevant to the action being performed.
    - Added speed in status. Speed is typically govern by the slowest IO (e.g. write). Speed displayed is the average for the entire process.
    - Increased visible GUI log size

    Release 1.2.1001
    WIN32 release 23 Mar 2015
    - Fixed crash when creating Image with Post Image Verification enabled.

    Release 1.2.1000
    WIN32 release 20 Mar 2015
    - Fixed issue when Zeroing GPT formatted drives. Will not correctly zero MBR and Primary GPT and Secondary GPT.
    - New Zero behavior. Zeroing will wipe entire drive (write 0x00 to the whole drive).
    - Added option to extend partition when writing image. Only supported for single partition images with NTFS filesystem.
    - Reformat option will Zero the drive (boot sector only) and reclaim any disk space and format the volume with NTFS filesystem. Requires Vista or later.

    Release 1.1.1015
    WIN32 release 26 Jun 2014
    - Fixed issue when Zeroing GPT formatted drives. Will not correctly zero MBR and Primary GPT and Secondary GPT.

    Release 1.1.1014
    WIN32 release 16 Dec 2013
    - Option to Zero the Master Boot Record. This will allow Windows to see the full size of the drive after reinserting. Windows should automatically prompt to format unrecognized drive.
    - New warning message if you try to write an image located on any of the drives selected as destination drives.

    Release 1.1.1013
    WIN32 release 16 Oct 2013
    - Verify Bug Fix
    - In DebugMode, when verifying option is checked and when image is a valid imageUSB .bin file, the checksum will be calculated on the actual image as well. Drive checksum comparison will still be against checksum stored in header.

    Release 1.1.1012
    WIN32 release 16 Oct 2013
    - Write verification is now supported for images not created with imageUSB. A checksum will be calculated for the image and then compared to the image written on the UFD.
    - Enabled UFD list while imageUSB is writing/creating images. Should allow you to scroll the list to see progress of all UFD when more than 4 drives are used.
    - Source code clean up

    Release 1.1.1011
    WIN32 release 18 March 2013
    - Added ability to select '.img' files.

    Release 1.1.1010
    WIN32 release 22 October 2012
    - Fixed a program crash when reading fake USB drives. It seems that some USB flash drives are tricking the Windows API to incorrectly recognizing the end of the drive.

    Release 1.1.1009
    WIN32 release 9 July 2012
    - Allows writing images larger than destination drives. End of the image will be truncated and not be written to the drive.

    Release 1.1.1008
    WIN32 release 19 January 2012
    - Added a delay on retry for failed write attempts. Will wait 1 sec before retry.
    - Address an issue where writing image would sometimes fail with Error 5: Access is Denied.

    Release 1.1.1007
    WIN32 release 16 November 2011
    - Fixed some erroneous debug logging messages.
    - Tweaked verification settings, should report which offset verification failed at.
    - For Writing to flash drive, upon write failure, imageUSB will retry up to 3 times to rewrite to the failed location.

    Release 1.1.1006
    WIN32 release 6 October 2011
    - Improved debug logging.

    Release 1.1.1005
    WIN32 release 6 July 2011
    - Added the ability to write .ISO to USB drives. The drive must be bigger than the iso and the drive size will
    be truncated to the size of the iso. To recover lost storage, use Window's Disk Management tool.

    Release 1.1.1004
    WIN32 release 25 January 2011
    - Fixed an issue that would occur if more than one drives are being processed at once (happened sporadically).
    - Added "-d" command line option that will log additional debug info
    - Fixed typos

    Release 1.1.1003
    WIN32 release 22 December 2010
    - Notification/prompt when imaging finishes.
    - Option for post image verification for both creating from and writing from usb drives. Previously, writing to drives always was verified. Verification may double the imaging time.
    - Each image created with imageUSB will have an accompanying log file written with checksum values calculated during the creation process.
    - MD5 & SHA1 checksum calculation implemented
    - Now with more warning prompts! To prevent accidently destroying data.
    - Simultaneous image creation is now supported. See the help documentation for naming convention used.
    - Running imageUSB with -l command line will save a log (The same one as seen at the bottom of the GUI).

    Release 1.1.1002
    WIN32 release 15 December 2010
    - Fixed issue with overall progress bar not updating for subsequent writes after aborting.
    - Cosmetic / UI changes/fixes
    - Signed Executable

    Release 1.1.1001
    WIN32 release 8 December 2010
    - Concurrent image writing to UFD.
    - Asthetics Changes.

    Release 1.1.1000
    WIN32 release 1 December 2010
    - GUI version.

    Release 1.0.1001
    WIN32 release 23 July 2010
    - The USB Flash Drive data is now verified.

    Release 1.0.1000
    WIN32 release 17 June 2010
    - First version.


Top
 Profile  
 
 Post subject: Re: ImageUSB
PostPosted: Mon Jul 31, 2017 9:19 pm 
Offline

Joined: Sat Jun 23, 2012 4:28 pm
Posts: 449
The current version of ImageUSB is v1.3.1003


Top
 Profile  
 
 Post subject: Re: ImageUSB
PostPosted: Thu Oct 19, 2017 9:27 pm 
Offline

Joined: Sat Jun 23, 2012 4:28 pm
Posts: 449
1.3.1004


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group