Change history for PassMark DiskCheckup


2017-02-03 17:09:57
Updated by billon

  • Version: v3.4 (Build 1002 1003)
  • Size (in bytes): 2262413 2265835
  • Icon: Updated
  • Release date: 2016 2017-06 02-15 03
  • What's new: [list] [*]Added: [list] [*]SATA Support signaling for speed retrieving support NVMe to the device SMART info. Fixed ambiguity in between Win10; [*]Check SATA for 'SanDisk' in signalling the speed model support name and SATA if transport detected, do compliance. [/list] Fixed: [list] [*]Bug not with perform exported byte report order showing reversal; [*]Check strange characters for 'THNS' (Toshiba) string in the 'Interface' field. [*]Exported model name and if report present, do not showing perform correct byte SMART order attributes reversal. [/list] [*]'ECC info size' and 'Buffer for size' are NVMe now disks reported as 'N/A' if the value is 0. [*]Attribute Fixed ID low not disk being space stored warning for incorrectly NVMe appearing SMART for TEC large data. [/ drives (ie. > 1TB). [/list]


2016-06-15 20:14:06
Updated by billon

  • Version: v3.4 (Build 1001 1002)
  • Size (in bytes): 2259328 2262413
  • Release date: 2016-03 06-21 15
  • What's new: [ Added: [list] [*]Updated SATA list signaling of speed SMART attributes according support to the specific device drive model info. The Fixed set ambiguity of between SMART SATA attributes signalling to speed display support is and determined SATA by transport performing compliance. [/list] Fixed: [list] [*]Bug a with regular exported expression report comparison showing on strange the characters drive model. [*]SMART Info tab now contains an 'Info' icon which displays a description of in the SMART attribute when moused over. Each attribute may also display an up or down icon to indicate whether a higher or lower raw value is better. [*]SMART History tab now displays the raw value history. [*]A new 'Status Interface' attribute is displayed in the Device Info tab which indicates that a drive is "OK" unless: a) < 10% disk space is available in any of the disk's volumes, b) Disk temperature is higher than the threshold, or c) 1 or more SMART value(s) have exceeded a threshold field. [*]Device Info tab now displays the disk's real-time activity. The refresh interval can be configured in the Configuration window. [*]Fixed issue with dates being truncated in the exported Exported report. Also removed not errors showing appearing in the reports when no correct SMART history is available. [*]Added device attributes info + SMART support for PCIe M.2 NVMe Samsung and Intel drives disks. [*]Fixed Attribute bug ID with not strange being characters stored appearing for on NVMe the SMART TEC notification message box. [*]Fixed bug with TEC notification incorrectly being triggered when temperature attribute is below the threshold data. [/list]


2016-03-21 16:57:31
Updated by billon

  • What's new: [list] [*]Updated list of SMART attributes according to the specific drive model. The set of SMART attributes to display is determined by performing a regular expression comparison on the drive model. [*]SMART Info tab now contains an 'Info' icon which displays a description of the SMART attribute when moused over. Each attribute may also display an up or down icon to indicate whether a higher or lower raw value is better. [*]SMART History tab now displays the raw value history. [*]A new 'Status' attribute is displayed in the Device Info tab which indicates that a drive is "OK" unless: a) < 10% disk space is available in any of the disk's volumes, b) Disk temperature is higher than the threshold, or c) 1 or more SMART value(s) have exceeded a threshold. [*]Device Info tab now displays the disk's real-time activity. The refresh interval can be configured in the Configuration window. [*]Fixed issue with dates being truncated in the exported report. Also removed errors appearing in the reports when no SMART history is available. [*]Added device info + SMART support for PCIe M.2 NVMe Samsung and Intel drives. [*]Fixed bug with strange characters appearing on the TEC notification message box. [*]Fixed bug with TEC notification incorrectly being triggered when temperature attribute is below the threshold. [/list]


2016-03-21 07:11:19
Updated by billon

  • Version: v3.2 4 (Build 1000 1001)
  • System Requirement: Win98 WinME WinNT Win2K
  • Size (in bytes): 1271064 2259328
  • Screenshot: Updated
  • Release date: 0000 2016-00 03-00 21


2016-03-04 21:14:32
Updated by webfork

  • System Requirement:
  • Synopsis: PassMark DiskCheckup monitors is the a SMART disk attributes diagnostic of tool a that particular monitors hard the disk drive for possible long term drive failure indicators via SMART sensors. This includes 'Spin Up Time', number of start/stops, number of hours powered on, and temperature all displayed with the threshold value for that attribute. Users can evaluate drive reliability by observing if the value is close to or below the threshold. It's is recommended that system drives at threshold be replaced or shifted to backup / redundant data storage.
  • Icon: Updated


2013-12-20 02:37:25
Updated by webfork

  • Synopsis: PassMark DiskCheckup allows the user to monitor monitors the SMART attributes of a particular hard disk drive for possible long term drive failure indicators. This standardized system for anticipating failure includes 'Spin Up Time', number of start/stops, number of hours powered on, and temperature. DiskCheckup displays all the current values of the SMART attributes, along displayed with the Threshold threshold value for that attribute. If . Users any can attribute evaluate drive reliability by observing if the value is close to or below the threshold, the . It's drive recommended should that not be considered reliable. System system drives at threshold should be replaced and or shifted to backup or / redundant data storage tasks only.
  • How to extract: [list=1] [*]Download the installer and [url=http://www.portablefreeware.com/faq.php#extract]extract[/url] to a temporary folder [*]Move of the your contents choice [*]The of [i]{app}[/i] to application a files folder are of in your the {app} folder choice [*]Launch [i]DiskCheckup.exe[/i] [/list]


2013-12-15 16:55:19
Updated by Emka

  • Version: v3.1 2 (Build 1004 1000)
  • System Requirement:


2012-07-07 18:38:04
Updated by Emka

  • Version: V3 v3.1 (Build 1002 1004)
  • Synopsis: PassMark DiskCheckup allows the user to monitor the SMART attributes of a particular hard disk drive for possible long term drive failure. This standardized system for anticipating failure includes 'Spin Up Time', number of start/stops, number of hours powered on, and temperature. DiskCheckup displays the current values of the SMART attributes, along with the Threshold value for that attribute. If any attribute value is close to or below the threshold, the drive should not be considered reliable. System drives at threshold should be replaced and shifted to backup or redundant data storage tasks only.
  • How to extract: [list=1] [*]Download the installer and [url=http://www.portablefreeware.com/faq.php#extract ]extract[/url] to a folder of your choice [*]The application files are in the {app} folder [*]Launch [i]DiskCheckup.exe [/i] [/list]
  • What's new: DiskCheckup now displays all detected drives, not just SMART-enabled drives


2012-05-15 16:46:12
Updated by webfork

  • Synopsis: PassMark DiskCheckup allows the user to monitor the SMART attributes of a particular hard disk drive for possible long term drive failure, such . This as standardized system for anticipating failure includes 'Spin Up Time', the number of start/stops, the number of hours powered on , and the temperature. DiskCheckup displays the current values of the SMART attributes, along with the Threshold value for that attribute. If any attribute value is close to or below the threshold, the drive is should no not longer be considered reliable.System and drives at threshold should be replaced and shifted to backup or redundant data storage tasks only.
  • How to extract: Download the installer and extract to a folder of your choice. The application files are in the {app} folder. Launch DiskCheckup.exe.


2012-04-30 19:46:22
Updated by Checker

  • How to extract: Download the installer and extract to a folder of your choice. The application files are in the {app} folder. Launch DiskCheckup.exe.


2012-04-30 11:57:14
Updated by I am Baas

  • Version: V3.1 (Build 1000 1002)
  • Size (in bytes): 1265497 1271064
  • What's new: Added support for executing disk self tests (if implemented by the drive) Drive information can DiskCheckup now be refreshed by pressing 'F5' or clicking on the refresh button. Clicking on the drive icon will no longer displays refresh all the detected drive drives, not information. Minor just UI SMART-enabled fixes drives


2011-08-22 01:46:43
Updated by Checker

  • What's new: Added support for executing disk self tests (if implemented by the drive) Drive information can now be refreshed by pressing 'F5' or clicking on the refresh button . Clicking on the drive icon will no longer refresh the drive information. Minor UI fixes


2011-08-13 21:34:12
Updated by Checker

  • What's new: Added support for executing disk self tests (if implemented by the drive) Drive information can now be refreshed by pressing 'F5' or clicking on the refresh button.  Clicking on the drive icon will no longer refresh the drive information. Minor UI fixes


2011-08-13 21:33:42
Updated by I am Baas

  • Version: V3.0 1 (Build 1008 1000)
  • Size (in bytes): 886997 1265497
  • What's new: Revision Author Datev3.0 (1008) KM 26 May 2011------------------------------------------------------------------- 1. Fixed issue with drives reporting the same capacity (SysInfo DLL fix)2. Improved error handling for sending e-mail notificationRevision Author Datev3.0 (1007) RN 4 May 2011------------------------------------------------------------------- 1. Built with SysInfo DLL v1.0 build 10122. Fixed program not responding issue with some email servers that stop responding when sending emailRevision Author Datev3.0 (1006) KM 25 Jan 2011------------------------------------------------------------------- 1. Fixed memory leak when no SMART history available2. Increased the number of physical disks supportedRevision Author Datev3.0 (1005) KM 4 Jan 2011------------------------------------------------------------------- 1. Fixed raw values displayed as hexadecimal in DiskCheckup report filesRevision Author Datev3.0 (1004) KM 2 Nov 2010------------------------------------------------------------------- 1. Fixed bug causing crash during startup2. Minor fixesRevision Author Datev3.0 (1003) KM 19 Aug 2010------------------------------------------------------------------- 1. Added SMTP authentication support for e-mail notifications.2. Added '-d' command line argument for debug mode (Debug mode is off by default).3. Added '-m' command line argument to start DiskCheckup minimized to system tray.Revision Author Datev3.0 (1002) KM 6 Aug 2010------------------------------------------------------------------- 1. Fixed issue with some drive types not being detected (but previously detected by DiskCheckup v2.1).Revision Author Datev3.0 (1001) KM 2 Aug 2010-------------------------------------------------------------------1. Fixed message prompt issue when there is a media card reader with no media inserted.2. Fixed issue with e-mail alert not being sent when the disk temperature is equal to the temperature warning level.


2011-05-29 01:11:59
Updated by admin

  • Version: V3.0 (Build 1000 1008)
  • System Requirement: Win98 WinME WinNT Win2K
  • How to extract: Download the installer and extract to a folder of your choice. The application files are in the {app} folder. Launch DiskCheckup.exe.. .
  • Size (in bytes): 974848 886997
  • Dependencies: Administrator rights
  • Stealth: No Yes
  • What's new: Revision Author Datev3.0 (1008) KM 26 May 2011------------------------------------------------------------------- 1. Fixed issue with drives reporting the same capacity (SysInfo DLL fix)2. Improved error handling for sending e-mail notificationRevision Author Datev3.0 (1007) RN 4 May 2011------------------------------------------------------------------- 1. Built with SysInfo DLL v1.0 build 10122. Fixed program not responding issue with some email servers that stop responding when sending emailRevision Author Datev3.0 (1006) KM 25 Jan 2011------------------------------------------------------------------- 1. Fixed memory leak when no SMART history available2. Increased the number of physical disks supportedRevision Author Datev3.0 (1005) KM 4 Jan 2011------------------------------------------------------------------- 1. Fixed raw values displayed as hexadecimal in DiskCheckup report filesRevision Author Datev3.0 (1004) KM 2 Nov 2010------------------------------------------------------------------- 1. Fixed bug causing crash during startup2. Minor fixesRevision Author Datev3.0 (1003) KM 19 Aug 2010------------------------------------------------------------------- 1. Added SMTP authentication support for e-mail notifications.2. Added '-d' command line argument for debug mode (Debug mode is off by default).3. Added '-m' command line argument to start DiskCheckup minimized to system tray.Revision Author Datev3.0 (1002) KM 6 Aug 2010------------------------------------------------------------------- 1. Fixed issue with some drive types not being detected (but previously detected by DiskCheckup v2.1).Revision Author Datev3.0 (1001) KM 2 Aug 2010-------------------------------------------------------------------1. Fixed message prompt issue when there is a media card reader with no media inserted.2. Fixed issue with e-mail alert not being sent when the disk temperature is equal to the temperature warning level.


2010-07-07 16:35:24
Updated by admin

  • Synopsis: PassMark DiskCheckup allows the user to monitor the SMART attributes of a particular hard disk drive for possible long term drive failure, such as ' 'Spin Up Time', ', the number of start/stops, the number of hours powered on and the temperature. DiskCheckup displays the current values of the SMART attributes, along with the Threshold value for that attribute. If any attribute value is close to or below the threshold, the drive is no longer reliable and should be replaced.


2010-07-07 09:25:40
Updated by admin

  • Icon: Updated
  • Screenshot: Updated


2010-07-07 09:23:43
Updated by admin

  • Icon: Updated


2010-07-07 09:22:01
Updated by admin

  • Version: V2 V3.0 (Build 1004 1000)
  • System Requirement: Win95 Win98 WinME WinNT Win2K Vista
  • Synopsis: PassMark DiskCheckup allows the user to monitor the SMART attributes of a particular hard disk drive for possible long term drive failure, such as ' 'Spin Up Time', ', the number of start/stops, the number of hours powered on and the temperature. DiskCheckup displays the current values of the SMART attributes, along with the Threshold value for that attribute. If any attribute value is close to or below the threshold, the drive is no longer reliable and should be replaced.
  • How to extract: Download the installer and use Universal Extractor to extract to a folder of your choice. Delete The the application folder $PLUGINSDIR files and are in the file NSIS.nsi {app} folder. Launch the program by double-clicking on DiskCheckup.exe. Note: Windows 9x/Me users will need to copy the file smartvsd.vxd into C:\WINDOWS\SYSTEM\IOSUBSYS (if this file does not already exist). A system restart will be necessary for Windows to pick up this new virtual driver. ..
  • Size (in bytes): 776552 974848
  • Writes settings to: None Application folder


2007-03-14 01:24:13
Added by admin